If you have ever spent an afternoon scraping rust, fighting old paint, or blasting the same dirty surface again and again with plain water, you know the problem:

Some buildup needs more than pressure.

The Pressure Washer Wet Sandblasting Kit connects to your pressure washer and pulls dry abrasive media into the high-pressure water stream. That gives your washer the extra abrasive bite it needs to help remove rust, loose paint, graffiti, grease, and stuck-on grime from suitable metal, concrete, wall, deck, and workshop surfaces.

It is a simple upgrade for tough cleaning, restoration, and surface prep jobs where scrubbing alone takes too long.

Turn Your Pressure Washer Into a Wet Sandblasting Setup

Regular pressure washing works well for dirt, mud, and light grime. But when rust, flaking paint, graffiti marks, or baked-on buildup bonds to the surface, water alone often is not enough.This wet sandblasting attachment adds dry abrasive media to the water stream, helping your pressure washer cut through stubborn surface buildup with less manual scraping and sanding.

Includes the Key Parts You Need to Get Started

Some pressure washer attachments look simple until you realize you still need extra clamps, fittings, nozzles, or protective gear.

This kit comes with the main setup parts included:

- 9.8 ft / 3 m hose
- 16-inch pressure washer wand
- 16-inch sand wand
- Protective goggles
- 4 hose clamps
- Replacement ceramic nozzles
- Rubber sealing rings

That means fewer extra parts to hunt down and a smoother setup right out of the box.

Helps Remove Rust, Paint, Graffiti, Grease, and Heavy Surface Buildup

For restoration and cleanup jobs, plain water often washes over the surface without breaking through the layer underneath.The Sakerplus Wet Sandblasting Kit is designed to help remove tough buildup from suitable metal, wood, concrete, walls, decks, and workshop surfaces. Use it for surface prep before repainting, cleaning old hardware, removing loose coatings, or tackling stubborn outdoor grime.

Built With Brass, Stainless Steel, and Wear-Resistant Ceramic Nozzles

Wet sandblasting puts pressure on every part of the attachment, especially the fittings and nozzles. This kit is built with a brass nozzle output, stainless steel wand, and wear-resistant ceramic nozzles for steady performance and corrosion resistance.It supports working pressure up to 5000 PSI, making it a strong match for serious pressure washer cleaning and surface prep jobs.

Works With Common Dry Abrasive Media

Different jobs call for different levels of cleaning power. This kit works with suitable abrasive media for surface prep, rust removal, paint stripping, and other cleaning tasks. For steadier suction, keep the intake positioned correctly while you work, so the media feeds smoothly into the water stream and creates a more consistent blasting effect.

Once I connected it to my pressure washer wand, the setup was pretty straightforward. The intake tube was easy to position, and once everything was in place, it worked steadily without much adjustment.

Lucas W.

Verified Buyer

6. Quick 1/4 Inch Connector Makes Setup Simple

Complicated attachments waste time before the real work even starts. The 1/4 inch quick connector attaches easily to most pressure washer guns or wands. For smoother sand suction, keep the sand intake dry and positioned above the nozzle outlet while working.

1/4 inch quick connector

Smooth dry sand suction

* Results based on a survey of 4,125 customers.

The Simple Secret To Stronger Surface Cleaning — Without Endless Scraping, Sanding, Or Repeating The Same Pressure-Washer Pass

The Pressure Washer Wet Sandblasting Kit upgrades your pressure washer by combining water pressure with dry abrasive media, helping you remove rust, paint, grease, graffiti, and stubborn buildup from tough surfaces more efficiently.